G-2150/S-2150 Bolt Type Chain Shackles

Product Categories

G-2150/S-2150 Bolt Type Chain Shackles

• Working Load Limit and Grade 6 permanently shown on every shackle.

• Forged, Quenched & Tempered, with alloy pins.

• Hot-dip galvanized (G) or self-colored (S). 85 ton shackles have hot-dip galvanized bows and the bolts are Dimetcoted® and painted red.

• Sizes 3/8 inch and below are mechanically galvanized.

• Fatigue rated to 20,000 cycles at 1-1/2 times the Working Load Limit. (1/2t - 55t).

Inquiry immediately
add to the cart

Product details:

• Approved for use at -40° F (-40° C) to 400° F (204° C).

• Meets or exceeds all requirements of ASME B30.26.

• Sizes 1/2 - 25t meet the performance requirements of EN13889:2003.

• Shackles 55 metric tons and smaller can be furnished proof tested with certificates to designated standards, such as ABS, DNV, Lloyds, or other certification when requested at time of order.

• Type Approval certification in accordance with ABS 2016 Steel Vessel Rules and 2016 ABS Guide for Certification of Lifting Appliance. Certificates available when requested at time of order and may include additional charges.

• Meets the performance requirements of Federal Specification RR-C-271H, Type IVB, Grade A, Class 3, except for those provisions required of the contractor.

• All 2150 shackles can meet charpy requirements of 31 ft-lb (42 Joules) avg at -4° F (-20° C) upon special request.

• Look for the Red Pin®... the mark of genuine Crosby quality

Specification	WLL	Part Number		Unit weight	Size(mm)
Specification	(t)	G-2150	S-2150	(kg)	A	B	D	F	G	K	M	P	R
1/4	1/2	1019768	–	0.06	11.9	7.85	6.35	15.5	19.1	40.4	24.6	39.6	6.35
5/16	3/4	1019770	–	0.1	13.5	9.65	7.85	19.1	25.4	48.5	29.5	46.2	7.85
3/8	1	1019772	–	0.15	16.8	11.2	9.65	23.1	31	58.5	35.8	55	9.65
7/16	1-1/2	1019774	–	0.22	19.1	12.7	11.2	26.9	36.1	67.5	41.1	63.5	11.2
1/2	2	1019775	1019784	0.34	20.6	16	12.7	30.2	41.4	77	46	71	12.7
5/8	3-1/4	1019793	1019800	0.67	26.9	19.1	16	38.1	51	95.5	58.5	89.5	16
3/4	4-3/4	1019819	1019828	1.14	31.8	22.4	19.1	46	60.5	115	70	103	20.6
7/8	6-1/2	1019837	1019846	1.74	36.6	25.4	22.4	53	71.5	135	81	120	24.6
1	8-1/2	1019855	1019864	2.52	42.9	28.7	25.4	60.5	81	151	93.5	135	25.4
1-1/8	9-1/2	1019873	1019882	3.45	46	31.8	28.7	68.5	91	172	103	150	31.8
1-1/4	12	1019891	1019908	4.9	51.5	35.1	31.8	76	100	191	115	165	35.1
1-3/8	13-1/2	1019917	1019926	6.24	57	38.1	35.1	84	111	210	127	183	38.1
1-1/2	17	1019935	1019944	8.39	60.5	41.4	38.1	92	122	230	137	196	41.1
1-3/4	25	1019953	1019962	14.2	73	51	44.5	106	146	279	162	230	54
2	35	1019971	1019980	21.2	82.5	57	51	122	172	312	184	264	60
2-1/2	55	1019999	1020004	38.6	105	70	66.5	145	203	377	238	344	66.5
3	85	1020013	–	56	127	82.5	76	165	216	429	279	419	89

message:

Name:*
Telephone:*
Mail:*
Nation:

Message:*